Self-assembly, optical behavior, and permeability of a novel capsule based on an azo dye and polyelectrolytes

A novel capsule composed of an azo dye, Congo red (CR), and different polymers, including poly(styrenesulfonate, sodium salt) (PSS), poly(allylamine hydrochloride) (PAH), and poly(diallyldimethylammonium chloride) (PDDA), have been successfully fabricated by the layer-by-layer self-assembly technique. The stepwise linear deposition process was monitored by means of UV-visible absorption measurements. The formation of hollow capsules was verified by confocal laser scanning microscopy (CLSM) and scanning force microscopy (SFM). The resulting hollow PSS/PAH/CR/PDDA capsules displayed a sensitive response to visible light. Optical changes of the hollow capsules prior to and after the photoreaction were investigated in detail by means of UV-visible spectroscopy, CLSM, and SFM. It was found that the photochemical reaction of the assembled hollow capsules depends strongly on the matrix. Qualitative results on the permeability of the hollow capsule walls with CR as one component indicate that the permeability of the walls can be easily photo-controlled at varying irradiation time intervals without addition of external chemicals.     

Formation of polymeric micelles with amino surfaces from amphiphilic AB‐type diblock copolymers composed of poly(glycolic acid lysine) segments and polylactide segments

Amphiphilic AB‐type diblock copolymers composed of hydrophobic poly(L ‐lactide) (PLA) segments and hydrophilic poly(glycolic acid lysine) [poly(Glc‐Lys)] segments with amino side‐chain groups self‐associated to form PLA‐based polymeric micelles with amino surfaces in an aqueous solution. The average diameter of the loose core–shell polymeric micelles for poly(Glc‐Lys) [number‐average molecular weight (M_n) = 1240]‐b‐PLA (M_n = 7000) obtained by a dimethyl sulfoxide/water dialysis method was estimated to be about 50 nm in water by dynamic light scattering measurements. The size and shape of the obtained polymeric micelles were further observed with transmission electron microscopy and atomic force microscopy. To investigate the possibility of applying the obtained PLA‐based polymeric micelles as bioabsorbable vehicles for hydrophobic drugs, we tested the entrapment of drugs in poly(Glc‐Lys) (M_n = 1240)‐b‐PLA (M_n = 7000) micelles and their release with doxorubicin as a hydrophobic drug. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1426–1432, 2002     

Monte Carlo Simulation of the Assembly of bis‐Biotinylated DNA and Streptavidin

We present Monte Carlo simulations of the self‐assembly of bivalent bis‐biotinylated DNA molecules with the tetravalent biotin‐binding protein streptavidin (STV). By fitting the STV binding probabilities for the four possible valencies, the modelling correctly reproduces the dependencies of various network parameters experimentally observed in an earlier study. The combined results from the experimental and theoretical studies suggest that the binding probability for divalent STV formation is about 50 times larger than for the formation of trivalent and about 200 times larger than for tetravalent STV. In accordance with the experimental results, the modelling also indicates that the mixture of an equimolar ratio of DNA and STV leads to a maximum in size of the oligomeric DNA–STV clusters formed. Furthermore, we found a percolation transition in which the DNA cluster size increases rapidly with increasing DNA concentration resulting in the formation of a single supercluster at elevated concentrations. This behaviour coincides with the occurrence of an immobile band previously observed in electrophoretic experiments, indicating the formation of extremely large DNA–STV aggregate networks.     

DABCO-directed self-assembly of bisporphyrins (DABCO=1,4-diazabicyclo[2.2.2]octane)

Three isomeric zinc bisporphyrins have been prepared by covalently linking together two aminoporphyrins with an isophthalic acid derivative. The porphyrins differ in the substitution pattern on the meso phenyl groups, that is, ortho, meta, or para. Titrations carried out by UV-visible and 1H NMR spectroscopy have been used to map out the stabilities and the stoichiometries of the complexes formed with 1,4-diazabicyclo[2.2.2]octane (DABCO) in chloroform. The ortho- and meta-substituted bisporphyrins form 1:1 intramolecular sandwich complexes. The para-substituted bisporphyrin cannot adopt the cofacial conformation required for this type of complex and forms a higher order 2:2 intermolecular assembly, which is stable over a wide range of DABCO concentrations.     

Precise Conductance Measurements on Dilute Aqueous Solutions of Sodium and Potassium Hydrogenphosphate and Dihydrogenphosphate

Precise conductance measurements are reported on dilute aqueous solutions of the sodium and potassium salts of orthophosphoric acid at 25 ^∘C. Conductance measurements on solutions of electrolytes such as these phosphate salts that exist in solution as complicated mixtures of ions have previously proved difficult to interpret. To overcome this, a mathematical method has been developed to calculate the concentrations of all the species in the aqueous system M₃PO₄/M₂HPO₄/M₂HPO₄/H₃PO₄ (M = Na or K) over a continuous range of stoichiometries. The Lee–Wheaton conductance equation has been used to interpret the conductance of these multicomponent solutions in terms of the limiting ionic conductances and concentrations of all the ions in the solution. The limiting molar conductances of the ions H₂PO₄ ⁻ and HPO₄ ²⁻ and the ion-pair formation constants of these ions with sodium and potassium ions were determine This work has enabled the accurate determination of solution parameters for the important hydrogenphosphate ions in water and provides an excellent example of the use of an advanced conductance theory in the analysis of the conductance of multicomponent electrolyte systems.     

Properties of a genetic algorithm extended by a random self-learning operator and asymmetric mutations: A convergence study for a task of powder-pattern indexing

Genetic algorithms represent a powerful global-optimisation tool applicable in solving tasks of high complexity in science, technology, medicine, communication, etc. The usual genetic-algorithm calculation scheme is extended here by introduction of a quadratic self-learning operator, which performs a partial local search for randomly selected representatives of the population. This operator is aimed as a minor deterministic contribution to the (stochastic) genetic search. The population representing the trial solutions is split into two equal subpopulations allowed to exhibit different mutation rates (so called asymmetric mutation). The convergence is studied in detail exploiting a crystallographic-test example of indexing of powder diffraction data of orthorhombic lithium copper oxide, varying such parameters as mutation rates and the learning rate. It is shown through the averaged (over the subpopulation) fitness behaviour, how the genetic diversity in the population depends on the mutation rate of the given subpopulation. Conditions and algorithm parameter values favourable for convergence in the framework of proposed approach are discussed using the results for the mentioned example. Further data are studied with a somewhat modified algorithm using periodically varying mutation rates and a problem-specific operator. The chance of finding the global optimum and the convergence speed are observed to be strongly influenced by the effective mutation level and on the self-learning level. The optimal values of these two parameters are about 6 and 5%, respectively. The periodic changes of mutation rate are found to improve the explorative abilities of the algorithm. The results of the study confirm that the applied methodology leads to improvement of the classical genetic algorithm and, therefore, it is expected to be helpful in constructing of algorithms permitting to solve similar tasks of higher complexity.     

Preparation of block copolymer vesicles in solution

Block copolymer vesicles can be prepared in solution from a variety of different amphiphilic systems. Polystyrene‐block‐poly(acrylic acid), polystyrene‐block‐poly(ethylene oxide), and many other block copolymer systems can produce vesicles of a wide range of sizes; those in the range of 100–1000 nm have been explored extensively. Different factors, such as the absolute and relative block lengths, the presence of additives (ions, homopolymers, and surfactants), the water content in the solvent mixture, the nature and composition of the solvent, the temperature, and the polydispersity of the hydrophilic block, provide control over the types of vesicles produced. Their high stability, resistance to many external stimuli, and ability to package both hydrophilic and hydrophobic compounds make them excellent candidates for use in the medical, pharmaceutical, and environmental fields. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 923–938, 2004     

Hierarchical Structure‐Within‐Structure Morphologies in A2‐star‐(B‐alt‐C) Molecules

We employ dissipative particle dynamics (DPD) to examine the self‐assembly behavior of A₂‐star‐(B‐alt‐C) molecules. We successfully observe various types of hierarchical structure‐within‐structures, such as A‐formed spheres in the matrix formed by B and C alternating layers, hexagonally packed A‐formed cylinders in the matrix with B and C segregated layers, B and C alternating layers‐within‐lamellae, coaxial B and C alternating domains within hexagonally packed BC‐formed cylinders in the A‐matrix, and co‐centric BC‐alternating domains within BC‐formed spheres in the A‐matrix, by increasing the A composition. Generally speaking, the small length‐scale B and C segregated domains are in parallel to the large length‐scale structures. This hierarchical periodicity along the same axis as well as the various characteristic structures, that the A₂‐star‐(B‐alt‐C) copolymers display, are quite different from those in A‐block‐(B‐graft‐C) coil‐comb copolymers. Moreover, it is interesting to find that when the copolymer chain length increases, though the hierarchical structure type is maintained, the number of small length‐scale lamellae that can form within the large length‐scale structure increases. These hierarchical structures under various compositions are reported theoretically for the first time in the copolymer systems consisting of the alternating blocks, and are in good agreement with the most recent experimental work by Matsushita and co‐workers (Macromolecules 2007 , 40, 4023).     

Templated ceramic microstructures by using the breath-figure method

We describe the synthesis of two cyclobutadiene(cyclopentadienyl)cobalt-containing poly(p-phenylene ethynylene)s (PPEs) and their use as precursors for stable ceramic surface coatings. Organometallic PPEs were shaped into hexagonally ordered assemblies by using the breath-figure method. Such breath figures can be washed away with an appropriate solvent. Upon pyrolysis at 500 degrees C under either nitrogen or air, the bubble arrays persist as ceramics and are insoluble in organic solvents or water. The formed pyrolyzed bubble arrays were analyzed by optical and scanning electron microscopy, as well as energy dispersive X-ray microanalysis (EDX). The composition of the ceramic materials is discussed based on EDX and IR data.     

Schiff碱配合物模拟酶催化性能的温度效应研究

研究了新型Schiff碱双锰配合物在模拟酶催化亚碘酰苯单加氧化环已烷反应及 被亚碘酰苯氧化破坏反应中的温度效应。结果表明，在模拟酶催化反应体系中同时 存在催化环已烷单加氧反应及催化剂的氧化破坏反应；催化反应速率及氧化破坏反 应速率均随反应温度升高有规律地增大，但氧化破坏反应比催化反应对反应温度更 敏感；催化反应总产率一般随反应温度升高而降低；最适宜的反应温度为25 ℃。